Gen 2 F-150 engine with transmission swap 33k miles

Gen 2 F-150 Coyote Engine Specifications

Specification	Details
Engine	Ford 5.0L Coyote V8 (Gen 2)
Production	2015–2017
Engine Code	Coyote Gen 2
Configuration	90° V8
Block Material	Aluminum
Cylinder Heads	Aluminum DOHC
Valvetrain	DOHC, 32 valves
Variable Valve Timing	Twin Independent Variable Cam Timing (Ti-VCT)
Displacement	4,951 cc (302 cu in)
Bore	92.2 mm (3.63 in)
Stroke	92.7 mm (3.65 in)
Compression Ratio	10.5:1
Fuel System	Sequential Multi-Port Fuel Injection
Fuel Required	Regular or Premium gasoline
Firing Order (Truck)	1-3-7-2-6-5-4-8
Redline	Approximately 6,500 RPM

Performance

Specification	Output
Horsepower	385 hp @ 5,750 rpm
Torque	387 lb-ft (525 Nm) @ 3,850 rpm
Maximum Engine Speed	Approximately 6,500 rpm

6R80 Automatic Transmission Specifications

Specification	Details
Transmission	Ford 6R80
Type	6-Speed Automatic
Drive	RWD / 4WD
Manual Mode	SelectShift
Tow/Haul Mode	Yes
Lock-up Torque Converter	All forward gears

Gear Ratios

Gear	Ratio
1st	4.17
2nd	2.34
3rd	1.52
4th	1.14
5th	0.87
6th	0.69
Reverse	3.40

The 6R80 is known for its low first gear for towing and two overdrive gears for efficient highway driving.

Complete Engine & Transmission Swap Package

A complete Gen 2 swap is easiest when sourced from a single donor vehicle.

Engine Assembly

• Complete 5.0L Gen 2 long block
• Intake manifold
• Throttle body
• Fuel rails
• Injectors
• Alternator
• Starter
• A/C compressor
• Power steering (if applicable)
• Exhaust manifolds
• Engine mounts

Transmission

• 6R80 automatic
• Torque converter
• Flexplate
• Transmission cooler lines
• Transmission crossmember
• Transmission mount
• Driveshaft (often requires modification depending on the chassis)

Electronics

• Engine wiring harness
• Transmission harness
• Powertrain Control Module (PCM)
• Body Control Module (if required)
• Accelerator pedal (drive-by-wire)
• OBD-II diagnostic port
• Key/PATS security components or compatible tuning solution

Cooling System

• Aluminum radiator
• Electric cooling fans
• Transmission cooler
• Radiator hoses
• Overflow tank

Fuel System

• High-pressure in-tank fuel pump
• Fuel filter
• Fuel lines
• EVAP components (if emissions compliance is required)

Exhaust

• Factory exhaust manifolds or swap headers
• Catalytic converters (if required)
• Custom exhaust system

Dimensions (Approximate)

Specification	Measurement
Engine Weight	~445–460 lb (202–209 kg)
Engine Width	~29 in (737 mm)
Engine Length	~28 in (711 mm)
Engine Height	~27 in (686 mm)

Best Vehicles for a Gen 2 Coyote Swap

Common swap candidates include:

• 1997–2003 Ford F-150
• 2004–2008 Ford F-150
• 1980–1996 Ford F-150
• Ford Bronco
• Ford F-100
• Ford Mustang
• Ford Ranger (with fabrication)
• Custom hot rods and off-road builds